Deformation mechanism and its effect on electrical conductivity of ACF flip chip package under thermal cycling condition: An experimental study

Cited 46 time in webofscience Cited 0 time in scopus
  • Hit : 882
  • Download : 664
DC FieldValueLanguage
dc.contributor.authorKwon, WSko
dc.contributor.authorHam, SJko
dc.contributor.authorPaik, Kyung-Wookko
dc.date.accessioned2008-01-18T02:17:56Z-
dc.date.available2008-01-18T02:17:56Z-
dc.date.created2012-02-06-
dc.date.created2012-02-06-
dc.date.issued2006-
dc.identifier.citationMICROELECTRONICS RELIABILITY, v.46, no.2-4, pp.589 - 599-
dc.identifier.issn0026-2714-
dc.identifier.urihttp://hdl.handle.net/10203/2844-
dc.description.abstractIn this study, experimental works are performed to investigate the deformation mechanism and electrical reliability of the anisotropic conductive adhesive film (ACF) joint subjected to temperature cycling for flip chip on organic board (FCOB) assemblies. This paper presents some dominant deformation parameters governing the electrical degradation in an ACF joint between a chip and a substrate when flip chip assembly is heated and cooled. The deformation mechanism of ACF flip chip assemblies during the temperature cycling are investigated using in situ high sensitivity moire interferometry. A four-point probe method is conducted to measure the real-time contact resistance of ACF joint subjected to the cyclic temperature variation. As the temperature increases below T-g of ACF, the bending displacement of assembly decreases linearly. At the temperature higher than T-g of ACF, there is no further change in bending behavior and in-plane deformations of a chip and a substrate become approximately free thermal expansion. It is because that soft-rubbery ACF at the temperature above T-g cannot provide the mechanical coupling between a chip and a substrate. The effect of bump location on the temperature dependent contact resistance is evident. A characteristic hysteresis in bending curves is observed and discussed. The contact resistance of the corner bumps increases with increasing temperature at a higher rate when compared to that of the middle. Failure analysis is performed to examine the ACF interconnections before and after thermal cycling test. The results indicate that during the thermal loading, the shear deformation is more detrimental to the electrical degradation of ACF joints than normal strain. (c) 2005 Elsevier Ltd. All rights reserved.-
dc.description.sponsorshipThis work was supported by Center for Electronic Packaging Materials of Korea Science and Engineering Foundation. The authors would like to thank Dr. S.B. Lee at Korea Advanced Institute of Science and Technology for his valuable advices on a moire´ analysis.en
dc.languageEnglish-
dc.language.isoen_USen
dc.publisherPERGAMON-ELSEVIER SCIENCE LTD-
dc.subjectBUMP HEIGHT-
dc.subjectJOINTS-
dc.titleDeformation mechanism and its effect on electrical conductivity of ACF flip chip package under thermal cycling condition: An experimental study-
dc.typeArticle-
dc.identifier.wosid000235441100038-
dc.identifier.scopusid2-s2.0-30844455580-
dc.type.rimsART-
dc.citation.volume46-
dc.citation.issue2-4-
dc.citation.beginningpage589-
dc.citation.endingpage599-
dc.citation.publicationnameMICROELECTRONICS RELIABILITY-
dc.identifier.doi10.1016/j.microrel.2005.06.014-
dc.embargo.liftdate9999-12-31-
dc.embargo.terms9999-12-31-
dc.contributor.localauthorPaik, Kyung-Wook-
dc.contributor.nonIdAuthorKwon, WS-
dc.contributor.nonIdAuthorHam, SJ-
dc.type.journalArticleArticle-
dc.subject.keywordPlusBUMP HEIGHT-
dc.subject.keywordPlusJOINTS-
Appears in Collection
MS-Journal Papers(저널논문)
Files in This Item
This item is cited by other documents in WoS
⊙ Detail Information in WoSⓡ Click to see webofscience_button
⊙ Cited 46 items in WoS Click to see citing articles in records_button

qr_code

  • mendeley

    citeulike


rss_1.0 rss_2.0 atom_1.0