Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 952 to 971 of 3882

952
"S" cam brake noise at low speed = 低回轉時의 S-캠 브레이크의 騷音分析link

Jeon, Sang-Bok; 전상복; et al, 한국과학기술원, 1983

953
SA106 Gr.C 배관재의 파괴인성치에 미치는 동적변형시효의 영향 = Effect of dynamic strain aging on fracture toughness fo SA106 Gr.C piping steellink

김대진; Kim, Dae-Jin; et al, 한국과학기술원, 1997

954
Scanline resolution-invariant depth completion using a single image and sparse LiDAR point cloud = 단일 이미지와 LiDAR 점구름을 이용한 LiDAR-채널 해상도에 불변한 깊이추정방법link

Ryu, Kwonyoung; Yoon, Kuk-Jin; et al, 한국과학기술원, 2021

955
SCARA형 로보트에 대한 최적 설계 = Optimal design to the SCARA-type robotlink

강봉수; Kang, Bong-Soo; et al, 한국과학기술원, 1993

956
SCARA형 직접 구동 방식 로봇 시스템에 대한 동역학적 모델의 개발과 응용에 관한 연구 = Study on the development and application of the dynamic model for a SCARA type direct drive robot systemlink

홍윤식; Hong, Yoon-Shik; et al, 한국과학기술원, 1995

957
Scattering pattern of acoustic cloak in compressible non-uniform mean flow = 압축성 비균일 평균 유동을 고려한 음향 투명망토의 산란 패턴link

Ryoo, Hyeonbin; Jeon, Wonju; et al, 한국과학기술원, 2017

958
Schlieren 기법을 이용한 2유체 연료분사 장치의 연료분포에 관한 가시화 연구 = A visualization study on fuel distribution from air-assisted fuel injector by schlieren techniquelink

이경민; Lee, Kyung-Min; et al, 한국과학기술원, 1993

959
SCM-4 강의 반복특성 및 저수명 피로 = Cyclic properties and low-cycle fatigue on SCM4 steellink

강대윤; Kang, Dae-Yoon; et al, 한국과학기술원, 1981

960
SCM4 의 동파괴 인성치에 관한 실험적 연구 = An experimental investigation on the dynamic fracture toughness of SCM4link

민운식; Min, Un-Sig; et al, 한국과학기술원, 1985

961
SCM440의 선삭에서 윤활조건과 테이퍼 각에 따른 가공성 평가에 관한 연구 = A study on the machinability evaluation according to lubrication conditions and taper angle for turning of SCM440link

최민석; Choi, Min-Seok; 이병채; Lee, Byung-Chai; et al, 한국과학기술원, 2014

962
SEA를 이용한 한 면이 탄성판인 직방형상자의 복사저항의 계산 = Simulation of the radiation resistancefor a parallel-piped box with a side of the elastic plate by using the SEA methodlink

임종윤; Lim, Jong-Yun; 엄윤용; 이병호; et al, 한국과학기술원, 1990

963
SEDRIS 기반의 국방 모의체계 합성환경 데이터베이스의 상호운용성 = Interoperability of synthetic environment database in defense simulation system based on SEDRISlink

김형기; Kim, Hyung-Ki; et al, 한국과학기술원, 2011

964
SEDRIS를 이용한 디지털 생산 시뮬레이션 환경의 융합 = Fusion of digital manufacturing simulation environment using SEDRISlink

문홍일; Moon, Hong-Il; et al, 한국과학기술원, 2004

965
Selective surface modification of silicon nanowires by using nanoscale joule heating and its sensor application = 나노스케일 줄 가열을 이용한 실리콘 나노와이어의 선택적 표면 개질 및 센서에의 응용link

Yun, Jeong-Hoon; 윤정훈; et al, 한국과학기술원, 2013

966
Self-assembled nanostructures via nanosphere lithography and their application to gas sensors = Nanosphere 리소그래피를 통한 자기 조립 나노 구조 및 가스 센서로써의 응용link

Gao, Min; Park, In Kyu; et al, 한국과학기술원, 2017

967
SEM을 이용한 미세접합 및 모니터링 시스템 개발에 관한 연구 = A study on the development of SEM applied microjoining and monitoring systemlink

황일한; Hwang, Il-Han; et al, 한국과학기술원, 2003

968
Sensor design and method to estimate the interaction forces between the instrument of the surgical robot and the tissues = 수술 로봇의 기구와 인체 조직과의 상호작용 힘을 간접적으로 추정하는 방법과 센서의 설계link

Kim, Suyong; Lee, Doo Yong; et al, 한국과학기술원, 2017

969
Separation of optically different particles in a cross-type optical particle separator = Cross-type optical particle separator 내에서 광학적 특성이 다른 입자의 분리link

Jung, Eun-Jung; 정은정; et al, 한국과학기술원, 2008

970
Separation of two-different-sized microparticles inside moving droplets with travelling surface acoustic waves = 진행표면탄성파를 활용한 움직이는 액적 내부의 크기가 다른 두 마이크로입자 분리link

Park, Kwangseok; Sung, Hyung Jin; et al, 한국과학기술원, 2018

971
Shadow mask의 열변형 해석 = Thermal deformation analysis of a shadow masklink

김현규; Kim, Hyeon-Gyu; et al, 한국과학기술원, 1993

rss_1.0 rss_2.0 atom_1.0