Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 961 to 980 of 3882

961
SCM440의 선삭에서 윤활조건과 테이퍼 각에 따른 가공성 평가에 관한 연구 = A study on the machinability evaluation according to lubrication conditions and taper angle for turning of SCM440link

최민석; Choi, Min-Seok; 이병채; Lee, Byung-Chai; et al, 한국과학기술원, 2014

962
SEA를 이용한 한 면이 탄성판인 직방형상자의 복사저항의 계산 = Simulation of the radiation resistancefor a parallel-piped box with a side of the elastic plate by using the SEA methodlink

임종윤; Lim, Jong-Yun; 엄윤용; 이병호; et al, 한국과학기술원, 1990

963
SEDRIS 기반의 국방 모의체계 합성환경 데이터베이스의 상호운용성 = Interoperability of synthetic environment database in defense simulation system based on SEDRISlink

김형기; Kim, Hyung-Ki; et al, 한국과학기술원, 2011

964
SEDRIS를 이용한 디지털 생산 시뮬레이션 환경의 융합 = Fusion of digital manufacturing simulation environment using SEDRISlink

문홍일; Moon, Hong-Il; et al, 한국과학기술원, 2004

965
Selective surface modification of silicon nanowires by using nanoscale joule heating and its sensor application = 나노스케일 줄 가열을 이용한 실리콘 나노와이어의 선택적 표면 개질 및 센서에의 응용link

Yun, Jeong-Hoon; 윤정훈; et al, 한국과학기술원, 2013

966
Self-assembled nanostructures via nanosphere lithography and their application to gas sensors = Nanosphere 리소그래피를 통한 자기 조립 나노 구조 및 가스 센서로써의 응용link

Gao, Min; Park, In Kyu; et al, 한국과학기술원, 2017

967
SEM을 이용한 미세접합 및 모니터링 시스템 개발에 관한 연구 = A study on the development of SEM applied microjoining and monitoring systemlink

황일한; Hwang, Il-Han; et al, 한국과학기술원, 2003

968
Sensor design and method to estimate the interaction forces between the instrument of the surgical robot and the tissues = 수술 로봇의 기구와 인체 조직과의 상호작용 힘을 간접적으로 추정하는 방법과 센서의 설계link

Kim, Suyong; Lee, Doo Yong; et al, 한국과학기술원, 2017

969
Separation of optically different particles in a cross-type optical particle separator = Cross-type optical particle separator 내에서 광학적 특성이 다른 입자의 분리link

Jung, Eun-Jung; 정은정; et al, 한국과학기술원, 2008

970
Separation of two-different-sized microparticles inside moving droplets with travelling surface acoustic waves = 진행표면탄성파를 활용한 움직이는 액적 내부의 크기가 다른 두 마이크로입자 분리link

Park, Kwangseok; Sung, Hyung Jin; et al, 한국과학기술원, 2018

971
Shadow mask의 열변형 해석 = Thermal deformation analysis of a shadow masklink

김현규; Kim, Hyeon-Gyu; et al, 한국과학기술원, 1993

972
Shank shock absorption mechanism of a powered exoskeleton for reduction of ground impact = 정강이 충격 흡수 메커니즘을 사용한 외골격 로봇의 지면 충격 저감link

Park, Jeongsu; Kong, Kyoungchul; et al, 한국과학기술원, 2021

973
Shape and pose estimation of a skeleton in X-ray images using statistical shape and intensity model = 두방향 엑스선영상에서의 통계 형상 및 세기 모델을 이용한 자세 추정link

Oh, Jeongseok; Koo, Seungbum; et al, 한국과학기술원, 2021

974
Shape effect on flapping dynamics of an inverted flag in a uniform flow = 균일 유동 내 역방향 깃발의 플래핑 운동에 깃발 형상이 미치는 영향link

Park, Jeong Woo; Sung, Hyung Jin; et al, 한국과학기술원, 2019

975
Shape optimal design of a torsion bar and clamped beams using boundary element method = 경계요소법을 이용한 비틀림 축과 고정보의 형상최적설계link

Lee, Choon-Yeol; 이춘열; et al, 한국과학기술원, 1985

976
Shear bonding strength of cement -bone interface under compression = 압축응력 하에서의 시멘트와 뼈의 경계면의 전단 접착 강도에 관한 연구link

Song, Han-Nah; 송한나; et al, 한국과학기술원, 2002

977
Shift link 용 자동유도 brazing 기구의 설계 및 제작 = Design & manufacture of automatic induction brazing machine for shift linklink

조용주; Cho, Yong-Joo; et al, 한국과학기술원, 1979

978
SI 엔진의 성능, 배출가스, EGR 효과의 예측을 위한 cycle simulation 에 관한 연구 = A study on the SI engine cycle simulation for predicting performance, emission and EGR effectlink

정용일; Jeong, Yong-Il; et al, 한국과학기술원, 1985

979
SIAF 수치해법을 사용한 압축성 내부 유동장 해석 = Analysis of compressible internal flows using scalar implicit approximate factorization algorithmlink

서승원; Seo, Seung-Won; et al, 한국과학기술원, 1992

980
SIL(solid immersion lens)을 이용한 근접장 마이크로스코프의 제작및 설계에 관한 연구 = Design and fabrication of near-field microscope using solid immersion lenslink

윤형길; Yoon, Hyoung-Kil; et al, 한국과학기술원, 2000

rss_1.0 rss_2.0 atom_1.0