Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 1981 to 2000 of 3882

1981
모델 예측 제어 기반 자동변속기 락업 클러치의 최적 슬립 제어 전략 = Optimal slip control strategy of lock-up clutch in automatic transmission based on model predictive controllink

이해우; 최세범; et al, 한국과학기술원, 2022

1982
모델 해석을 통한 소각로 성능 개선 = Performance improvement of waste incinerators by using engineering toolslink

남형식; Nam, Hyung-Sik; et al, 한국과학기술원, 2005

1983
모델예측제어 모방학습과 강화학습을 보행 로봇에 적용한 연구 = Reinforcement learning with imitation learning from the MPC: application to legged robotslink

염동훈; 박해원; Park, Hae-Won; 황보제민; et al, 한국과학기술원, 2022

1984
모델재료를 이용한 대형 개방형 단조품의 성형에 관한 연구 = A study on forming of heavy open die forging products using modeling materiallink

이근안; Lee, Geun-An; et al, 한국과학기술원, 1992

1985
모델재료를 이용한 대형단조품 성형에 관한 연구 = A study on forming of heavy forging products using modeling materialslink

주은덕; Chu, Eun-Deog; et al, 한국과학기술원, 1993

1986
모듈형 세라믹 인공고관절 골두의 형상설계에 관한 연구 = Shape design of ceramic head of hip prosthesislink

한창수; Han, Chang-Soo; 윤용산; 김영룡; et al, 한국과학기술원, 1991

1987
모드 제어와 시스템 규명을 위한 구동기/가진기 위치 결정법 = Determination of optimal actuator/shaker location for mode control and system identificationlink

노현석; Roh, Hyoun-Surk; et al, 한국과학기술원, 1994

1988
모드 해석을 위한 초기 유한요소모델의 신뢰도 판정법에 대한 비교연구 = A comparison study for the judgement of confidence level of initial FE Models for modal analysislink

이준호; Lee, Joon-Ho; et al, 한국과학기술원, 1999

1989
모르타르 요소를 이용한 불일치 격자 연계와 2D 구현 = Connection of non-matching meshes using mortar elements and its 2D implementationlink

조동호; Cho, Dong-Ho; et al, 한국과학기술원, 2010

1990
모션 데이터베이스 및 운동감 합성을 이용한 차량 시뮬레이터 = A driving simulator based on motion database and motion blendinglink

차무현; Cha, Moo-Hyun; 권동수; 한순흥; et al, 한국과학기술원, 2006

1991
모션 캡쳐 데이터를 이용한 휴머노이드 로봇의 상체 동작 생성과 합성 = Upper body motion generation and interpolation for humanoid robots using motion capture datalink

허정우; Heo, Jung-Woo; et al, 한국과학기술원, 2009

1992
모아레 영상정보를 이용한 모드 매개변수 추출 = Modal parameter extraction using moiré vision informationlink

김동현; 박영진; et al, 한국과학기술원, 2017

1993
모아레방법을 이용한 박막의 기계적 성질 측정에 관한 연구 = A study on measurement of mechanical properties of thin membrane using Moire methodlink

김재현; Kim, Jae-Hyun; et al, 한국과학기술원, 1996

1994
모우드 I 상태의 Tearing instability 에 관한 실험적 연구 = An experimental study on tearing instability under mode Ilink

최병일; Choi, Byung-Il; et al, 한국과학기술원, 1985

1995
모우드 변환 행렬을 이용한 베어링지지 기어 회전축계의 유한 요소 해석 = Finite element analysis of a geared rotor bearing system using a modal trasformation matrixlink

이태봉; Lee, Tae-Bong; et al, 한국과학기술원, 1989

1996
모형 소각로내에서의 $NO_x$ 저감에 관한 연구 = Reduction of $NO_x$ for model MSWIlink

이건구; Lee, Gun-Goo; et al, 한국과학기술원, 1997

1997
모형 소각로의 열간 유동 실험을 통한 혼합 특성 측정에 관한 연구 = A study on the mixing characteristics measurements by hot flow experiments of the model municipal solid waste incineratorlink

정광국; Jeong, Kwang-Kook; et al, 한국과학기술원, 1996

1998
모형 실험에 의한 소수력용 튜브라 수차의 성능해석 = Performance analysis of the small hydro tubular turbine through the model testlink

이원용; Lee, Won-Yong; et al, 한국과학기술원, 1985

1999
목표 지향 설계 개념을 적용한 양방향 원격조종 시스템의 제어기 설계 방법론에 관한 연구 = Target oriented design method for bilateral teleoperation controllerlink

김종현; Kim, Jong-Hyun; et al, 한국과학기술원, 2003

2000
몬테카를로 방법을 이용한 격자주사식 삼차원 형상측정시스템 교정 과정의 불확도 분석 = Uncertainty analysis for a calibration process of fringe projection profilometry by using monte carlo methodlink

김현진; Kim, Hyun-Jin; et al, 한국과학기술원, 2011

rss_1.0 rss_2.0 atom_1.0