Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 1741 to 1760 of 3882

1741
단색 분광기의 회절격자 정밀 구동 메카니즘의 개발 및 성능 평가 = A development and performance evaluation of precision driving mechanism for monochromator gratinglink

김대석; Kim, Dae-Suk; et al, 한국과학기술원, 1997

1742
단섬유 강화 사출성형 복합재료로 만든 차량용 범퍼빔의 충돌해석 = The impact analysis of bumper beam made of short-fiber-reinforced injection-molded (SFRIM) compositelink

곽창수; Kwak, Ch'ang-Soo; et al, 한국과학기술원, 1998

1743
단섬유복합재료의 거동에 대한 확률유한요소해석 = Stochastic finite element analysis of the behavior of short fiber composite materialslink

강명석; Kang, Myung-Seok; et al, 한국과학기술원, 1993

1744
단속 연삭지석에 의한 스테인레스강의 연삭 특성 = The grinding characteristics of staniless steel using intermittent griding wheellink

권오병; Kweun, O-Byung; et al, 한국과학기술원, 1996

1745
단속형 가변 적층 쾌속 조형 공정(VLM-ST)을 위한 정밀도 향상에 관한 연구 = Accuracy improvement in transfer-type variablelamination manufacturing process using expandable polystyrene foamlink

최홍석; Choi, Hong-Seok; et al, 한국과학기술원, 2002

1746
단속형 반능동 감쇠기 및 압력제한 반능동 감쇠기 설계 및 실험적 연구 = On-off type semi-active damper(SAD) and pressure limited SAD design and its experimental studylink

성락훈; Sung, Rag-Hoon; et al, 한국과학기술원, 1990

1747
단속형 반능동 감쇠기를 사용한 현가시스템의 실험적연구 = An experimental study of a suspension system equipped with on-off type semi-active damperslink

윤시영; Youn, Si-Young; et al, 한국과학기술원, 1991

1748
단순 래핑이 평치차의 진동 및 소음에 미치는 영향에 대한 실험적 연구 = The effect of simple lapping on the noise and vibration of spur gear gystems : an experimental approachlink

이동익; Lee, Dong-Ick; et al, 한국과학기술원, 1984

1749
단순 모델을 이용한 GMA용접 시스템의 동적 거동 해석 = Analysis of dynamic behavior of GMAW system using simple modellink

이재영; Lee, Jae-Young; et al, 한국과학기술원, 1999

1750
단순 연화층 모델을 이용한 Coal 성상별 coke oven 내 팽창압 예측 = Coking pressure estimation using a simple plastic layer model in a coke ovenlink

박주현; Park, Ju-Hyun; et al, 한국과학기술원, 2007

1751
단순화 모델링을 이용한 공작기계의 변형 오차 해석 및 최적화 = Deformation error analysis and optimization of machine tool using a simplified modellink

양승욱; Yang, Seung-Uk; et al, 한국과학기술원, 1998

1752
단열 진공유리의 제작 및 열전달 계수 측정에 관한 실험적 연구 = An experimental study on manufacturing of insulation vacuum glazing and measurement of the thermal conductancelink

이보화; Lee, Bo-Hwa; et al, 한국과학기술원, 2006

1753
단위체 격자 재구성 기법을 이용한 2차원 냉간 단조의 유한 요소해석 = Finite element analysis of two-dimensional cold forging by using modular remeshinglink

김영태; Kim, Yeong-Tae; et al, 한국과학기술원, 1990

1754
단위체 격자 재구성법과 전문가 시스템을 이용한 2차원 냉간 단조의 유한 요소 해석 = Finite element analysis of two-dimensional cold forging by using modular remeshing and expert systemlink

윤희도; Yun, Hee-Do; et al, 한국과학기술원, 1991

1755
단일 관성센서 데이터와 인공신경망을 이용한 상지반복 회전운동에서 손목 관절 위치 예측 = Prediction of wrist position using the data set from single inertial sensor and artificial neural networks in upper limb repetitive rotational motionlink

이기범; 김정; et al, 한국과학기술원, 2022

1756
단일 모우드 근사에 의한 동흡진기 설계 = Design of dynamic vibration absorber by single mode approximationlink

류인준; Ryu, In-Jun; et al, 한국과학기술원, 1989

1757
단일 비젼을 이용한 AUV 도킹시스템의 구현에 관한 연구 = A study on the development of docking system for AUV using mono visionlink

홍영화; Hong, Young-Hwa; et al, 한국과학기술원, 2003

1758
단일 서보를 이용한 정밀 직선 구동 시스템의 설계와 제어에 관한 연구 = Design and control of one servo type precision positioning systemlink

김용상; Kim, Yong-Sang; et al, 한국과학기술원, 1999

1759
단일 와환 확산 화염에 관한 실험적 연구 = An experimental study on the single vortex ring diffusion flamelink

이대근; Lee, Dae-Keun; et al, 한국과학기술원, 1998

1760
단일 캠 구동기구의 동 안정성 해석 = Dynamic stability of a single cam drive mechanismlink

김홍배; Kim, Hong-Bae; et al, 한국과학기술원, 1989

rss_1.0 rss_2.0 atom_1.0