Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 1421 to 1440 of 3882

1421
공작기계 양센타간 자동 편차보정 시스템 개발 = Development of an automatic compensation system for errors between two centerslink

박진호; Park, Jin-Ho; et al, 한국과학기술원, 1996

1422
공작기계 이송기구의 진동이 절삭에 미치는 영향 = Dynamic characteristics of machine tool feed-drive system and its effects on cuttinglink

조영호; Cho, Young-Ho; et al, 한국과학기술원, 1982

1423
공작기계 직선 베어링 안내면의 정도 설계에 관한 연구 = The accuracy design of LM guide system in machine toolslink

김경호; Kim, Kyung-Ho; 김승우; 이후상; et al, 한국과학기술원, 2000

1424
공작기계 평안내면의 마찰 특성 측정에 관한 연구 = A study on frictional characteristics of the plain type guidewaylink

이승만; Lee, Seung-Man; et al, 한국과학기술원, 1989

1425
공작기계용 기어박스의 소음/진동 해석 = Noise/vibration analysis of gearbox for machine toolslink

김광욱; Kim, Kwang-Wook; et al, 한국과학기술원, 1999

1426
공작기계의 고속 이송시의 동적 운동 정도에 관한 연구 = A study on the dyamic motion accuracy of machine tool in high feedratelink

오정후; Oh, Jung-Who; et al, 한국과학기술원, 1997

1427
공작기계의 채터 강성 평가에 관한 연구 = A study on chatter stability evaluation of machine toolslink

정낙신; Jung, Nak-Shin; et al, 한국과학기술원, 2009

1428
공중부유형 마이크로히터 위 $SnO_2$ 나노튜브의 직접 합성을 통한 저전력 가스센서 구현 = Direct synthesis of $SnO_2$ nanotubes on suspended microheaters for low power gas sensorslink

조인철; 박인규; et al, 한국과학기술원, 2017

1429
공초점 원리를 이용한 현미경 자동초점 = Autofocus of optical microscopes by confocal principlelink

박정재; Park, Jung-Jae; et al, 한국과학기술원, 2004

1430
공초점과 헤테로다인 간섭 원리를 이용한 측정시스템의 제안 및 측정 성능 향상에 관한 연구 = Improvement of measurement performance by using heterodyne differential interferometry and confocal microscopylink

김태중; Kim, Tae-Joong; et al, 한국과학기술원, 2004

1431
공학문제에 응용되는 경계요소법의 연구 = Investigation of the boundary element method for engineering applicationlink

이종선; Lee, Chong-Sun; et al, 한국과학기술원, 1985

1432
공학설계 방법론에 입각한 설계과정의 사례연구-종이컵 기계 = A case study of design process based on engineering design methodology-paper cup machinelink

조성산; Cho, Sung-San; et al, 한국과학기술원, 1986

1433
과급을 이용한 저온 디젤 연소의 운전영역 확장 및 배기 배출물 특성 = Expansion of operating range and emission characteristics in low temperature diesel combustion with supercharging systemlink

심의준; Shim, Eui-Joon; et al, 한국과학기술원, 2009

1434
과냉 액체 질소를 이용한 급속 냉각 과정에서의 열전달 현상에 대한 실험적 연구 = Experimental study on the heat transfer phenomena in rapid cooling process with subcooled liquid nitrogenlink

김도운; Kim, Do-Woon; et al, 한국과학기술원, 2000

1435
과도 분류 확산 화염의 구조에 관한 실험적 연구 = An observation of growing feature of the diffusion jet flamelink

한동인; Han, Dong-In; et al, 한국과학기술원, 1993

1436
과도상태에서 작동하는 극저온 열사이펀의 성능특성에 대한 연구 = Investigation on operation characteristics of cryogenic thermosiphon in transient operationlink

김영권; Kim, Young-Kwon; 정상권; 이상용; et al, 한국과학기술원, 2006

1437
과산화수소 촉매분해 기반 압력 피드백을 갖는 피스톤 실린더 타입의 공압 발생 장치 연구 = A study on a pneumatic generator of piston cylinder type with pressure feedback based on catalytic decomposition of hydrogen peroxidelink

조영전; Cho, Young-Jeon; et al, 한국과학기술원, 2014

1438
과수작업 보조를 위한 상지 지지기구의 설계 = Design for upper limbs supporting mechanism in pomiculture workslink

강대원; Kang, Dae-Won; et al, 한국과학기술원, 2014

1439
과열액체제트에 관한 실험적 연구 = An experimental study on the superheated liquid jetlink

이종근; Lee, Jong-Guen; et al, 한국과학기술원, 1987

1440
관 입구 영역에서의 층류유동 해석 = A study on fluid flow over the entrance region of a tubelink

김병용; Kim, Byung-Yong; et al, 한국과학기술원, 1980

rss_1.0 rss_2.0 atom_1.0