Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 21 to 40 of 3882

21
2륜자기균형이동차의 개발 및 외란 측정기를 이용한 강인제어 = Development of a 2-wheel self-balanced mobile platform and the robust control by disturbance observerlink

최동일; Choi, Dong-Il; et al, 한국과학기술원, 2007

22
2상 밀폐 자연 순환 회로내의 유동불안정성에 관한 실험적 연구 = Experimental study on the flow instabilities in a closed two phase natural circulation looplink

김명진; Kim, Myoung-Jin; et al, 한국과학기술원, 1991

23
2상 자연 순환 회로 내의 유동 진동에 관한 실험적 연구 = Experimental study on the flow oscillation inside a two-phase natural circulation looplink

오진호; Oh, Jin-Ho; et al, 한국과학기술원, 1989

24
2자유도 병렬 매니퓰레이터의 모형화 및 슬라이딩 모드 제어 = Modeling and sliding mode control of the two degree-of-freedom parallel manipulatorlink

신재철; Shin, Jae-Cheol; et al, 한국과학기술원, 1997

25
2자유도 중력보상 메커니즘이 적용된 단일통로 복강경 수술로봇 = A surgical robot system for single port laparoscopy with application of 2-DOF gravity compensation mechanismlink

정덕균; Jeong, Deok Gyun; et al, 한국과학기술원, 2016

26
2점 경계치 문제의 해를 위한 몇몇 알고리덤의 비교 = A comparison of some algorithms for the solution of two point boundary value problemlink

김영철; Kim, Young-Chul; et al, 한국과학기술원, 1985

27
2차 회절광 입사 차단을 위한 분광분석계 설계 = Design of spectrophotometer system for blocking 2nd order diffracted lightlink

홍영주; Hong, Young-Joo; et al, 한국과학기술원, 2004

28
2차원 강소성 유한요소해석에서의 안정성 및 효율성 향상에 관한 연구 = Improvement of stability and efficiency in two-dimensional rigid-plastic finite element methodlink

박근; Park, Khun; et al, 한국과학기술원, 1994

29
2차원 난류 평면 제트의 간헐도 측정 연구 = Intermittency measurement in two-dimensional turbulent plane jetlink

조지룡; Cho, Ji-Ryong; et al, 한국과학기술원, 1986

30
2차원 도면으로부터 3차원 CAD 모델의 재구성 = Reconstruction of 3D CAD models from 2D drawingslink

이한민; Lee, Han-Min; et al, 한국과학기술원, 2000

31
2차원 열확산을 고려한 티타늄 박막의 size effect 분석 = Analysis of size effect of the thin titanium film considering 2D thermal diffusionlink

최신우; 이봉재; et al, 한국과학기술원, 2023

32
2차원 유연성 기구의 동역학 해석 = Dynamic analysis of two dimensional flexible body mechanismlink

최규재; Choi, Gyoo-Jae; et al, 한국과학기술원, 1987

33
2차원 유한요소법의 전후처리 프로그램을 위한 근사최적격자의 구성 = Near-optimum mesh generation for two-dimensional, graphical finite element pre- and post-processorlink

이부윤; Lee, Boo-Youn; et al, 한국과학기술원, 1984

34
2차원 재순환 난류유동 해석을 위한 난류 계산모델과 수치적방법의 평가 = Assessment of computational turbulence models and numerical schemes for two-dimensional recirculating turbulent flowslink

동상근; Dong, Sang-Geun; et al, 한국과학기술원, 1985

35
2차원 트러스 구조물의 형상 최적화 = Shape optimal design of two-dimensional truss structureslink

김주펑; Kim, Ju-Pyeong; et al, 한국과학기술원, 1985

36
2차원 표면 온배수에 의한 열오염 현상의 시뮤레이션 = Laboratory simulation study on thermal pollution by two-dimensional surface discharge of heated waterlink

이상준; Lee, Sang-Jun; et al, 한국과학기술원, 1982

37
2축 수치제어용 보간기 개발과 위치제어에 관한 연구 = A study on the development of 2-axis interpolator for numerical control and the position controllink

최기봉; Choi, Kee-Bong; et al, 한국과학기술원, 1988

38
2축 자이로센서를 사용하는 차량 탑재용 안정화시스템의 안정화 오차에 관한 연구 = A study on error analysis of vehicle-mounted stabilization system using 2-axes gyro sensorslink

김중현; Kim, Joong-Hyun; 박영진; Park, Young-jin; et al, 한국과학기술원, 2008

39
2행정 가솔린 기화기식 엔진성능과 직접분사기 적용 시도 실험 연구 = An experimental study on the performance of a two-stroke caburetor gasoline engine and application trial for direct fuel injectionlink

김영민; Kim, Young-Min; et al, 한국과학기술원, 1996

40
3 점 굽힘 Springback 의 연구 및 굽힘 기계설계에의 응용 = Springback for three point bending and application to design of contour bending machinelink

이호용; Lee, Ho-Yong; et al, 한국과학기술원, 1981

rss_1.0 rss_2.0 atom_1.0