Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 3461 to 3480 of 3882

3461
축대칭 유한 요소 해석에서 단위체 격자 재구성법과 퍼지 로직을 이용한 전방투사법 = Forward projection using modular remeshing and fuzzy logic in axisymmetric finite element simulationlink

정낙면; Jung, Nak-Myeon; et al, 한국과학기술원, 1992

3462
축대칭 코안다 제트에 대한 실험적 고찰 = An experimental investigation of the axisymmetric coanda jetlink

김유곤; Kim, You-Gon; et al, 한국과학기술원, 1982

3463
축대칭 하이드로 미케니칼 디프 드로잉 공정의 유한 요소 해석 = Finite element analysis of axisymmetric hydro-mechanical deep drawing processlink

김한경; Kim, Han-Gyeong; et al, 한국과학기술원, 1990

3464
축대칭형 제품의 냉간 단조 공정 설계용 전문가 시스템 개발 = Development of expert system for process design of axisymmetric cold forginglink

김홍석; Kim, Hong-Seok; et al, 한국과학기술원, 1994

3465
축류펌프의 설계, 성능해석 및 검증시험 = Design, performance prediction and test of axial-flow pumplink

송재욱; Song, Jae-Wook; et al, 한국과학기술원, 1999

3466
축방향 유동이 회전하는 컵모양 용기 내의 열전달에 미치는 영향 = Effect of axial throughflow on heat transfer in a rotating cup-like cavitylink

고강혁; Ko, Kang-Hyuk; et al, 한국과학기술원, 2003

3467
축방향 하중을 이용한 진동형 마이크로 자이로스코프의 고유진동수 조율 = Tuning of micromachied gyroscope by the axial loadslink

조중현; Cho, Choong-Hyoun; et al, 한국과학기술원, 2006

3468
축방향에 수직으로 압력구배를 받는 2차원 난류 자유제트의 속도와 온도분포 계산 = Computation of velocity and temperature fields of a turbulent plane jet experiencing lateral pressure gradientlink

최문창; Choi, Moon-Chang; et al, 한국과학기술원, 1988

3469
축소규모 반건식 세정장치 실험에 관한 연구 = A study on scale-downed semi-dryer absorber experimentlink

최진환; Choi, Jin-Hwan; et al, 한국과학기술원, 1996

3470
축약된 유한요소모델과 실험적 모우드해석을 이용한 기계구조물의 연결부 동특성 규명 = Identification of joint dynamics of mechanical structures using condensed D.E.M. model and experimental modal analysislink

최병욱; Choi, Byeong-Ug; et al, 한국과학기술원, 1987

3471
축열식 공조시스템에서 빙축열조의 특성해석에 관한 실험적연구 = An experimental study on the performance analysis of the ice storage tank in the thermal storage systemslink

강채동; Kang, Chae-Dong; et al, 한국과학기술원, 1989

3472
축열조내 온도 분포에 관한 이차원 해석 및 실험적 연구 = Two dimensional analysis and experimental study on the temperature distribution in thermal storage tanklink

이동원; Lee, Dong-Won; et al, 한국과학기술원, 1985

3473
축예하중이 알루미늄/복합재료 하이브리드의 샤프트의 비틀림 피로 특성에 미치는 영향 = Effects of axial preload on the torsional fatigue characteristics of aluminum/composite hybrid shaftslink

김종운; Kim, Jong- Woon; et al, 한국과학기술원, 2004

3474
축전기형 전동기의 토오크에 대한 특성분석과 변동성분의 감소를 위한 연구 = Identification of torque characteristics in capacitor type electric motors and reduction of fluctuation componentlink

고홍석; Ko, Hong-Seok; et al, 한국과학기술원, 1993

3475
축하중을 받는 부분 용입재의 피로균열의 진전거동에 관한 연구 = Fatigue crack growth behavior of partial penetration welded joint under axial loadinglink

전상락; Jeon, Sang-Lack; et al, 한국과학기술원, 1992

3476
출력만의 측정에 의한 실험적 모우드 해석 방법에 관한 연구 = A study on the method of experimental modal analysis based upon output measurements onlylink

최규상; Choe, Gyu-Sang; et al, 한국과학기술원, 1986

3477
출력신호 궤환을 통한 진동자이로의 가진과 측정방식에 관한 연구 = A study on excitation and measurement method for the vubrating gyroscope by output feedbacklink

박성욱; Park, Sung-Wook; et al, 한국과학기술원, 1996

3478
충격 방법에 의한 공작기계 구조 진동의 실험적 해석 = Machine tool structural vibration analysis by impact testinglink

김범래; Kim, Bum-Lae; et al, 한국과학기술원, 1981

3479
충격 응력 최소화를 위한 충격점 결정에 관한 연구 = A study on locating impact point on a structure to minimize impact caused maximum stresslink

김형근; Kim, Hyeong-Keun; et al, 한국과학기술원, 1987

3480
충격력을 받는 빔과 쉘의 동적거동 = Dynamic behavior of beams and shells under impulsive loadslink

이기수; Lee, Ki-Su; et al, 한국과학기술원, 1977

rss_1.0 rss_2.0 atom_1.0