Browse "ME-Theses_Master(석사논문)" by Title 

Showing results 3401 to 3420 of 3882

3401
철도차량 바퀴와 레일사이의 힘, 운동측정 및 측정신호분석에 의한 마모예측에 관한 연구 = A study on force and motion measurement of rail and wheel contact and on wear estimation technique by force signal analysislink

이성국; Lee, Sung-Kuk; et al, 한국과학기술원, 1985

3402
청감특성을 고려한 소음저감대책 수립방법 : 냉장고 소음에의 적용 = A noise control method based on subjective perception : application to refrigerator noiselink

정광일; Jung, Kwang-Il; et al, 한국과학기술원, 2002

3403
체결방식에 따른 NC 공구의 코드화에 관한 연구 = Development of an NC tool-code system based on assembly mechanismlink

이재종; Lee, Jae-Jong; et al, 한국과학기술원, 1987

3404
초고속 광 간섭 단층촬영 및 초고속 비행 시간 측정을 위한 SPML 레이저 개발 = Development of SPML laser for ultrahigh-speed OCT and ultrafast time-of-flight detectionlink

조승완; 오왕열; et al, 한국과학기술원, 2023

3405
초고속 혈관조영 설치류 망막 OFDI 시스템 = High-speed angiographic optical frequency domain imaginglink

박장렬; Park, Jang Ryul; et al, 한국과학기술원, 2015

3406
초과 엔탈피 화염의 구조에 관한 실험적 연구 = An experimental study on the structure of excess enthalpy flamelink

유영돈; Yoo, Young-Don; et al, 한국과학기술원, 1988

3407
초기 두께분포가 있는 초소성 재료의 유한요소 성형해석 = Finite element simulation of superplastic sheet forming with initial non-uniform thickness distributionlink

최영준; Choi, Yeong-Jun; et al, 한국과학기술원, 1993

3408
초기 접촉 위치 제어를 위한 부족구동 로봇 손가락의 설계 = Design of under-actuated robot finger for controlling initial contact positionlink

권순표; 오준호; et al, 한국과학기술원, 2020

3409
초기난류특성이 2차원 난류평면제트의 전개에 미치는 영향 = Effect of initial turbulent characteristics on evolution of two-dimensional turbulent plane jetlink

이계복; Lee, Gye-Bok; et al, 한국과학기술원, 1983

3410
초미세립 알루미늄합금을 이용한 고강도 볼트 성형 = High strength bolt forming of ultra-fine grained aluminum alloylink

최준석; Choi, Jun-Seok; et al, 한국과학기술원, 2010

3411
초소성 재료의 압력제어성형에 관한 박막유한요소해석 = Numerical simulation of superplastic forming with pressure control using a membrane finite element methodlink

이기석; Lee, Ki-Seok; et al, 한국과학기술원, 1994

3412
초소형 흡착식 냉동기 개발에 대한 연구 = A study on the development of micro adsorption refrigeratorlink

최창훈; Choi, Chang-Hoon; et al, 한국과학기술원, 2005

3413
초소형 흡착식 압축기 개발에 대한 연구 = Investigation on development of micro sorption compressorlink

변정주; Byun, Jung-Joo; et al, 한국과학기술원, 2004

3414
초음속 과소 팽창 난류 제트의 해석을 위한 기초연구 = Basic analysis of the supersonic underexpanded turbulent jetslink

윤병국; Yun, Byung-Kook; et al, 한국과학기술원, 1990

3415
초음속 유동에서 코로나 방전을 이용한 금속 나노 입자의 생성 = Metallic nano particle generation by supersonic nozzle with corona dischargelink

정재희; Jung, Jae-Hee; et al, 한국과학기술원, 2004

3416
초음파 가진에 의한 표면저항 감소 = Reduction of skin friction by ultrasonic forcinglink

전영진; Jeon, Young-Jin; et al, 한국과학기술원, 2007

3417
초음파 가진을 이용한 폴리우레탄 미세포 포움의 가공 = Processing of polyurethane microcellular foam by ultrasonic excitationlink

박혁; Park, Hyeog; et al, 한국과학기술원, 1990

3418
초음파 접합에서 Au 스트립 범프의 형상이 접합 강도에 미치는 영향 = Influence of Au strip bump shape on bond strength with ultrasonic bondinglink

나성욱; Na, Sung-Wook; et al, 한국과학기술원, 2005

3419
초음파 진동절삭에 의한 광학 플라스틱의 연성모드화 미소표면현상에 관한 연구 = A study on micro surface-phenomenon of ductile mode by the ultrasonic vibration cutting for optical plasticslink

최인휴; Choi, In-Hyu; et al, 한국과학기술원, 1995

3420
초음파 측정에 의한 절삭작업중의 공구마멸 감지에 대한 연구 = A study on the in-process sensing of tool wear by acoustic emission measurementlink

이명상; Lee, Myeong-Sang; et al, 한국과학기술원, 1985

rss_1.0 rss_2.0 atom_1.0