DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, HY | ko |
dc.contributor.author | Han, SW | ko |
dc.contributor.author | Lee, HyuckMo | ko |
dc.date.accessioned | 2007-11-29T07:44:12Z | - |
dc.date.available | 2007-11-29T07:44:12Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2006-07 | - |
dc.identifier.citation | MATERIALS LETTERS, v.60, no.15, pp.1880 - 1883 | - |
dc.identifier.issn | 0167-577X | - |
dc.identifier.uri | http://hdl.handle.net/10203/2229 | - |
dc.description.abstract | In the present work, Mn and Cr were added to a commercial A356 (Al-7.0Si-0.38Mg-0.12Ti-0.02Sr in wt.%)-0.20Fe cast alloy to control the crystallization of beta-Al5FeSi. The tensile properties are compared in terms of the way the microstructures changed before and after the addition of 0.20Mn and 0.13Mn-0.13Cr. The addition of 0.20Mn causes the acicular P-Al5FeSi to be replaced by granular or skeletal alpha-Al(Mn,Fe)Si in solidification, and the additions of 0.13Mn-0.13Cr acts as an effective replacing element of beta-Al5FeSi. Moreover, the addition of 0.20Mn functionally improves the strength, and the addition of 0.13Mn-0.13Cr improves the strain as well as the strength compared to a commercial A356 cast alloy. (c) 2005 Elsevier B.V. All rights reserved. | - |
dc.description.sponsorship | This work was supported by the Korea Research Foundation Grant (KRF-2004-050-D0005). | en |
dc.language | English | - |
dc.language.iso | en_US | en |
dc.publisher | Elsevier Science Bv | - |
dc.subject | HEAT-TREATMENT | - |
dc.subject | MG ALLOYS | - |
dc.subject | AL | - |
dc.subject | BEHAVIOR | - |
dc.title | The influence of Mn and Cr on the tensile properties of A356-0.2OFe alloy | - |
dc.type | Article | - |
dc.identifier.wosid | 000237158200024 | - |
dc.identifier.scopusid | 2-s2.0-33646060440 | - |
dc.type.rims | ART | - |
dc.citation.volume | 60 | - |
dc.citation.issue | 15 | - |
dc.citation.beginningpage | 1880 | - |
dc.citation.endingpage | 1883 | - |
dc.citation.publicationname | MATERIALS LETTERS | - |
dc.identifier.doi | 10.1016/j.matlet.2005.12.042 | - |
dc.embargo.liftdate | 9999-12-31 | - |
dc.embargo.terms | 9999-12-31 | - |
dc.contributor.localauthor | Lee, HyuckMo | - |
dc.contributor.nonIdAuthor | Kim, HY | - |
dc.contributor.nonIdAuthor | Han, SW | - |
dc.type.journalArticle | Article | - |
dc.subject.keywordAuthor | A356 cast alloy | - |
dc.subject.keywordAuthor | alpha-Al(Mn,Cr,Fe)Si | - |
dc.subject.keywordAuthor | tensile properties | - |
dc.subject.keywordAuthor | cross slip | - |
dc.subject.keywordPlus | HEAT-TREATMENT | - |
dc.subject.keywordPlus | MG ALLOYS | - |
dc.subject.keywordPlus | AL | - |
dc.subject.keywordPlus | BEHAVIOR | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.