DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, Sun Jin | ko |
dc.contributor.author | Lee, Haneol | ko |
dc.contributor.author | Choi, Hyeongdo | ko |
dc.contributor.author | Kim, Yongjun | ko |
dc.contributor.author | We, Ju Hyung | ko |
dc.contributor.author | Shin, Ji Seon | ko |
dc.contributor.author | Lee, Keon Jae | ko |
dc.contributor.author | Cho, Byung-Jin | ko |
dc.date.accessioned | 2017-03-28T05:36:29Z | - |
dc.date.available | 2017-03-28T05:36:29Z | - |
dc.date.created | 2016-11-18 | - |
dc.date.created | 2016-11-18 | - |
dc.date.created | 2016-11-18 | - |
dc.date.issued | 2016-12 | - |
dc.identifier.citation | ACS NANO, v.10, no.12, pp.10851 - 10857 | - |
dc.identifier.issn | 1936-0851 | - |
dc.identifier.uri | http://hdl.handle.net/10203/220750 | - |
dc.description.abstract | Flexible thermoelectric generators (f-TEGs) are emerging as a semipermanent power source for self-powered sensors, which is an important area of research for next-generation smart network monitoring systems in the Internet-of-things era. We report in this paper a f-TEG produced by a screen printing technique (SPT) and a laser multiscanning (LMS) lift-off process. A screen-printed TEG was fabricated on a SiO2/a-Si/quartz substrate via the SPT process, and the LMS process completely separated the rigid quartz substrate from the original TEG by selective reaction of the XeCl excimer laser with the exfoliation layer (a-Si). Using these techniques, we fabricate a prototype f-TEG composed of an array of 72 TE couples that exhibits high flexibility at various bending radii, together with excellent output performance (4.78 mW/cm(2) and 20.8 mW/g at Delta T = 25 degrees C). There is no significant change in the device performance even under repeated bending of 8000 cycles. | - |
dc.language | English | - |
dc.publisher | AMER CHEMICAL SOC | - |
dc.subject | THIN-FILMS | - |
dc.subject | AMORPHOUS-SILICON | - |
dc.subject | ANNEALING PROCESS | - |
dc.subject | TEMPERATURE | - |
dc.subject | DEVICES | - |
dc.title | High-Performance Flexible Thermoelectric Power Generator Using Laser Multiscanning Lift-Off Process | - |
dc.type | Article | - |
dc.identifier.wosid | 000391079700027 | - |
dc.identifier.scopusid | 2-s2.0-85008311670 | - |
dc.type.rims | ART | - |
dc.citation.volume | 10 | - |
dc.citation.issue | 12 | - |
dc.citation.beginningpage | 10851 | - |
dc.citation.endingpage | 10857 | - |
dc.citation.publicationname | ACS NANO | - |
dc.identifier.doi | 10.1021/acsnano.6b05004 | - |
dc.contributor.localauthor | Lee, Keon Jae | - |
dc.contributor.localauthor | Cho, Byung-Jin | - |
dc.contributor.nonIdAuthor | Shin, Ji Seon | - |
dc.description.isOpenAccess | N | - |
dc.type.journalArticle | Article | - |
dc.subject.keywordAuthor | screen-printing technique | - |
dc.subject.keywordAuthor | laser multiscanning lift-off process | - |
dc.subject.keywordAuthor | freestanding and flexible thermoelectric power generator | - |
dc.subject.keywordPlus | THIN-FILMS | - |
dc.subject.keywordPlus | AMORPHOUS-SILICON | - |
dc.subject.keywordPlus | ANNEALING PROCESS | - |
dc.subject.keywordPlus | TEMPERATURE | - |
dc.subject.keywordPlus | DEVICES | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.