Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Subject STRENGTH
Showing results 1 to 60 of 67
| 100 years after Griffith: From brittle bulk fracture to failure in 2D materials Kiener, Daniel; Han, Seung Min, MRS BULLETIN, v.47, no.8, pp.792 - 799, 2022-08 |
| A combinatorial approach for the synthesis and analysis of AlxCryMozNbTiZr high-entropy alloys: Oxidation behavior Waseem, Owais Ahmed; Auyeskan, Ulanbek; Lee, Hyuck-Mo; Ryu, Ho Jin, JOURNAL OF MATERIALS RESEARCH, v.33, no.19, pp.3226 - 3234, 2018-10 |
| A new equation for the Cr equivalent in 9 to 12 Pct Cr steels Ryu, SH; Yu, Jin, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.29, no.6, pp.1573 - 1578, 1998-06 |
| Al-La-Ni-Fe bulk metallic glasses produced by mechanical alloying and spark-plasma sintering Choi, Pyuck-Pa; Kim, JS; Nguyen, OTH; Kwon, DH; Kwon, YS; Kim, JC, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.449, pp.1119 - 1122, 2007-03 |
| Analysis of creep behavior of SiC/Al metal matrix composites based on a generalized shear-lag model Ryu, Ho Jin; Chung, KH; Cha, SI; Hong, Soon-Hyung, JOURNAL OF MATERIALS RESEARCH, v.19, no.12, pp.3633 - 3640, 2004-12 |
| Atom probe tomography study of ultrahigh nanocrystallization rates in FeSiNbBCu soft magnetic amorphous alloys on rapid annealing Pradeep, KG; Herzer, G; Choi, Pyuck Pa; Raabe, D, ACTA MATERIALIA, v.68, pp.295 - 309, 2014-04 |
| Atomic scale investigation of redistribution of alloying elements in pearlitic steel wires upon cold-drawing and annealing Li, Y. J.; Choi, Pyuck-Pa; Goto, S.; Borchers, C.; Raabe, D.; Kirchheim, R., ULTRAMICROSCOPY, v.132, pp.233 - 238, 2013-09 |
| Atomic-scale analysis of carbon partitioning between martensite and austenite by atom probe tomography and correlative transmission electron microscopy Toji, Yuki; Matsuda, Hiroshi; Herbig, Michael; Choi, Pyuck-Pa; Raabe, Dierk, ACTA MATERIALIA, v.65, pp.215 - 228, 2014-02 |
| Atomic-scale investigation of epsilon and theta precipitates in bainite in 100Cr6 bearing steel by atom probe tomography and ab initio calculations Song, W.; von Appen, J.; Choi, Pyuck-Pa; Dronskowski, R.; Raabe, D.; Bleck, W., ACTA MATERIALIA, v.61, no.20, pp.7582 - 7590, 2013-12 |
| Atomic-scale mechanisms of deformation-induced cementite decomposition in pearlite Li, Y. J.; Choi, Pyuck-Pa; Borchers, C.; Westerkamp, S.; Goto, S.; Raabe, D.; Kirchheim, R., ACTA MATERIALIA, v.59, no.10, pp.3965 - 3977, 2011-06 |
| Bilayer thickness effects on nanoindentation behavior of Ag/Ni multilayers Kang, BC; Kim, HY; Kwon, OY; Hong, Soon-Hyung, SCRIPTA MATERIALIA, v.57, pp.703 - 706, 2007-10 |
| Breaking the elastic limit of piezoelectric ceramics using nanostructures: A case study using ZnO Kim, Hoon; Yun, Seokjung; Kim, Kisun; Kim, Wonsik; Ryu, Jeongjae; Nam, Hyeon Gyun; Han, Seung Min; et al, NANO ENERGY, v.78, 2020-12 |
| Chemical modification of carbon nanotubes and preparation of polystyrene/carbon nanotubes composites Ham, HT; Koo, CM; Kim, Sang Ouk; Choi, YS; Chung, IJ, MACROMOLECULAR RESEARCH, v.12, no.4, pp.384 - 390, 2004-08 |
| COARSENING RESISTANCE OF M2C CARBIDES IN SECONDARY HARDENING STEELS .1. THEORETICAL-MODEL FOR MULTICOMPONENT COARSENING KINETICS Lee, HyuckMo; ALLEN, SM; GRUJICIC, M, METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.22, no.12, pp.2863 - 2868, 1991-12 |
| Coarsening resistance of M2C carbides in secondary hardening steels: Part III. Comparison of theory and experiment Lee, HyuckMo; Allen, Samuel M., METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.22, no.12, pp.2877 - 2888, 1991-12 |
| Comparison to mechanical properties of epoxy nanocomposites reinforced by functionalized carbon nanotubes and graphene nanoplatelets Cha, Jaemin; Kim, Joon Hui; Ryu, Seongwoo; Hong, Soon Hyung, COMPOSITES PART B-ENGINEERING, v.162, pp.283 - 288, 2019-04 |
| Compositional evolution of long-period stacking ordered structures in magnesium studied by atom probe tomography Kim, Jin-Kyung; Guo, Wei; Choi, Pyuck-Pa; Raabe, Dierk, SCRIPTA MATERIALIA, v.156, pp.55 - 59, 2018-11 |
| Crystallization, phase evolution and corrosion of Fe-based metallic glasses: An atomic-scale structural and chemical characterization study Duarte, M. J.; Kostka, A.; Jimenez, J. A.; Choi, Pyuck-Pa; Klemm, J.; Crespo, D.; Raabe, D.; et al, ACTA MATERIALIA, v.71, pp.20 - 30, 2014-06 |
| Dry Spun 3D Woven Carbon Nanotube Anode Electrode for Li-Ion Batteries Ryu, Seongwoo; Kim, Yunkyoung; Lee, Hae-Shin; Hong, Soon-Hyung, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, v.14, no.12, pp.9152 - 9157, 2014-12 |
| EFFECT OF ALLOY COMPOSITION ON THE VOLUME FRACTION OF BETA-PHASE IN DUPLEX TITANIUM-ALLOYS Lee, HyuckMo; SOH, JR; Lee, Zin-Hyoung; KIM, YS, SCRIPTA METALLURGICA ET MATERIALIA, v.29, no.4, pp.497 - 501, 1993-08 |
| Effect of alloyed Ti:Zr ratio on phase stability of Al66Mn9(Ti,Zr)(25) intermetallic compounds Han, SZ; Rho, BS; Lee, HyuckMo; Choi, Si-Kyung, INTERMETALLICS, v.4, no.3, pp.245 - 249, 1996-04 |
| Effect of cooling rate on growth of the intermetallic compound and fracture mode of near-eutectic Sn-Ag-Cu/Cu pad: Before and after aging Jeong, SW; Kim, JH; Lee, HyuckMo, JOURNAL OF ELECTRONIC MATERIALS, v.33, no.12, pp.1530 - 1544, 2004-12 |
| Effect of Cr and Si additions on the continuous-cooling-transformation kinetics of gamma-based Ti-45 at.% Al alloy Lee, CY; Park, Joong Keun, PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, v.81, no.10, pp.2415 - 2426, 2001-10 |
| Effect of Nanofiber Orientation on Nanofiber Solder Anisotropic Conductive Films Joint Properties and Bending Reliability of Flex-on-Flex Assembly Kim, Tae-Wan; Lee, Tae-Ik; Pan, Yan; Kim, Wansun; Zhang, Shuye; Kim, Taek-Soo; Paik, Kyung-Wook, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.6, no.9, 2016-09 |
| Effect of starting powder on damage resistance of silicon nitrides Lee, SK; Lee, KS; Lawn, BR; Kim, Do Kyung, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.81, no.8, pp.2061 - 2070, 1998-08 |
| Effect of Zn on the intermetallics formation and reliability of Sn-3.5Ag solder on a Cu pad Jee, YK; Ko, YH; Yu, Jin, JOURNAL OF MATERIALS RESEARCH, v.22, no.7, pp.1879 - 1887, 2007-07 |
| Effects of heat treatment at 350 degrees C on the adhesion of Cu-Cr alloy films to polyimide Ahn, EC; Yu, Jin; Park, IS, JOURNAL OF MATERIALS SCIENCE, v.35, no.8, pp.1949 - 1955, 2000-04 |
| EFFECTS OF VACUUM HOT-PRESSING PARAMETERS ON THE TENSILE PROPERTIES AND MICROSTRUCTURES OF SIC-2124 AL COMPOSITES Hong, Soon-Hyung; Chung, KH, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.194, no.2, pp.165 - 170, 1995 |
| Efficient preparation of graphene liquid cell utilizing direct transfer with large-area well-stitched graphene Sasaki, Yuki; Kitaura, Ryo; Yuk, Jong Min; Zettl, Alex; Shinohara, Hisanori, CHEMICAL PHYSICS LETTERS, v.650, pp.107 - 112, 2016-04 |
| Electrical and mechanical properties of carbon nanotube reinforced copper nanocomposites fabricated by electroless deposition process Daoush, Walid M; Lim, Byung K; Mo, Chan B; Nam, Dong H; Hong, Soon-Hyung, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.513-14, pp.247 - 253, 2009-07 |
| Electrodeposition Cu and roll transfer of graphene for large scale fabrication of Cu-graphene nanolayered composite Kim, Sangmin; Kim, Wonsik; Hwangbo, Yun; Kim, Jae-Hyun; Han, Seung Min, 2D MATERIALS, v.6, no.3, pp.045051, 2019-09 |
| Elucidating the evolution of long-period stacking ordered phase and its effect on deformation behavior in the as-cast Mg-6Gd-1Zn-0.6Zr alloy Lee, Sangwon; Park, Yejun; Go, Jongbin; Kim, Young Mok; Sohn, Seok Su; Li, Jiehua; Choi, Pyuck-Pa, JOURNAL OF MAGNESIUM AND ALLOYS, v.11, no.8, pp.2801 - 2810, 2023-08 |
| Enhanced Mechanical Properties of Epoxy Nanocomposites by Mixing Noncovalently Functionalized Boron Nitride Nanofl akes Lee, Dong-Ju; Song, Sung-Ho; Hwang, Jae-Won; Jin, Sung-Hwan; Park, Kwang-Hyun; Kim, Bo-Hyun; Hong, Soon-Hyung; et al, SMALL, v.9, no.15, pp.2602 - 2610, 2013-08 |
| Flaw-Tolerance and R-Curve Behavior of Liquid-Phase-Sintered Silicon Carbides with Different Microsturctures Lee Seung Kun; Kim, Do Kyung; Kim, Chong Hee, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.78, no.1, pp.65 - 70, 1995-01 |
| Functionalization of carbon nanotubes for fabrication of CNT/epoxy nanocomposites Cha, Jaemin; Jin, Sunghwan; Shim, Jae Hun; Park, Chong Soo; Ryu, Ho Jin; Hong, Soon Hyung, MATERIALS AND DESIGN, v.95, pp.1 - 8, 2016-04 |
| Generalized shear-lag model for load transfer in SiC/Al metal-matrix composites Ryu, Ho Jin; Cha, SI; Hong, Soon-Hyung, JOURNAL OF MATERIALS RESEARCH, v.18, pp.2851 - 2858, 2003-12 |
| Hierarchical analysis of alloying element effects on gas nitriding rate of Fe alloys: A DFT, microkinetic and kMC study Kang, Ku; Kwon, Soonho; Lee, Changsoo; Hong, Doosun; Lee, Hyuck Mo, ACTA MATERIALIA, v.174, pp.173 - 180, 2019-08 |
| Highly porous YSZ ceramic foams using hollow spheres with holes in their shell for high-performance thermal insulation Cha, Hyun-Ae; Jo, Min-Gi; Moon, Young Kook; Hahn, Byung-Dong; Ahn, Cheol-Woo; Choi, Jong-Jin; Kim, Do Kyung, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v.43, no.15, pp.7041 - 7052, 2023-07 |
IMCs Microstructure Evolution Dependence of Mechanical Properties for Ni/Sn/Ni Micro Solder-Joints Ren, Ning; Fang, Heng; Wang, Dong; Hou, Chenyi; Zhao, Yatao; Chen, Fan; Tian, Ye; et al, MATERIALS, v.13, no.1, 2020-01 |
| Improving toughness of medium-Mn steels after friction stir welding through grain morphology tuning Jeong, Mun Sik; Park, Tak Min; Kim, Dong-Il; Fujii, Hidetoshi; Im, Hye Ji; Choi, Pyuck-Pa; Lee, Seung-Joon; et al, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, v.118, pp.243 - 254, 2022-08 |
| Load transfer mechanism and mechanical properties of SiCw/Al metal matrix composites Ryu, Ho Jin; Hong, Soon-Hyung, METALS AND MATERIALS-KOREA, v.6, no.1, pp.33 - 38, 2000-02 |
| Master curve characterization of the fracture toughness behavior in SA508 Gr.4N low alloy steels Lee, Ki-Hyoung; Kim, Min-Chul; Lee, Bong-Sang; Wee, Dang-Moon, JOURNAL OF NUCLEAR MATERIALS, v.403, no.1-3, pp.68 - 74, 2010-08 |
| Mechanical properties of C-SiC composite materials fabricated by the Si-Cr alloy melt-infiltration method Kim, Seyoung; Han, In Sub; Seong, Young-Hoon; Kim, Do Kyung, JOURNAL OF COMPOSITE MATERIALS, v.49, no.24, pp.3057 - 3066, 2015-10 |
| Mechanically improved sol-gel derived methacrylate-siloxane hybrid materials with urethane linkage Kim, Yun Hyeok; Choi, Gwang-Mun; Kim, Yong Ho; Bae, Byeong-Soo, JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, v.89, no.1, pp.111 - 119, 2019-01 |
| Microstructural evolution of Si3N4 ceramics from starting powders with different alpha-to-beta ratios Lee, Hyun Min; Tatami, Junichi; Kim, Do Kyung, JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, v.124, no.8, pp.800 - 807, 2016-08 |
| Microstructure and fracture toughness of SiC-platelet reinforced SiC Lee, SK; Kim, Do Kyung, JOURNAL OF MATERIALS SCIENCE LETTERS , v.21, no.17, pp.1343 - 1345, 2002-09 |
| Microstructure control in two-phase (B2+Ll(2)) Ni-Al-Fe alloys by addition of carbon Kim, SH; Kim, MC; Lee, JH; Oh, MH; Wee, Dang-Moon, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.329-331 , pp.668 - 674, 2002-06 |
| Microstructure control in two-phase Al-21Ti-23Cr alloy Lee, JK; Park, JY; Oh, MH; Wee, Dang-Moon, INTERMETALLICS, v.8, no.4, pp.407 - 416, 2000-04 |
| Multifunctional Polymer Nanocomposites Reinforced by 3D Continuous Ceramic Nanofillers Ahn, Changui; Kim, Sang-Min; Jung, Jae-Wook; Park, Junyong; Kim, Taegeon; Lee, Sang Eon; Jang, Dongchan; et al, ACS NANO, v.12, no.9, pp.9126 - 9133, 2018-09 |
| Nanomechanical behavior of beta-SiC nanowire in tension: Molecular dynamics simulations Kim, TY; Han, SS; Lee, HyuckMo, MATERIALS TRANSACTIONS, v.45, no.5, pp.1442 - 1449, 2004-05 |
| Numerical simulation on the microstress and microstrain of low Si-Mn-Nb dual-phase steel Dong, Hai-feng; Li, Jing; Zhang, Yue; Park, Joong Keun; Yang, Qing-xiang, INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, v.17, no.2, pp.173 - 178, 2010 |
| Oxidation behavior and ablation properties of MDF-based biomorphic SiC composites Lee, Dong Ju; Kim, Yun C.; Umer, Malik Adeel; Lim, Kwang H.; Park, Sang B.; Hong, Soon-Hyung, CERAMICS INTERNATIONAL, v.39, no.7, pp.7475 - 7481, 2013-09 |
| Polycrystalline cubic boron nitride sintered compacts prepared from nanocrystalline TiN coated cBN powder Umer, Malik Adeel; Sub, Park Hee; Lee, Dong Ju; Ryu, Ho Jin; Hong, Soon Hyung, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.552, pp.151 - 156, 2012-08 |
| Polymer/Carbon Nanotube Nanocomposites via Noncovalent Grafting with End-Functionalized Polymers Lee, Sun-Hwa; Park, Ji-Sun; Lim, Bo-Kyung; Kim, Sang-Ouk, JOURNAL OF APPLIED POLYMER SCIENCE, v.110, no.4, pp.2345 - 2351, 2008-11 |
| PREDICTION OF RESIDUAL STRESS-INDUCED CRACKING BY FINITE-ELEMENT ANALYSIS KWEON, SY; Choi, Si-Kyung, SCRIPTA METALLURGICA ET MATERIALIA, v.32, no.3, pp.359 - 364, 1995-02 |
| Rate effects in critical loads for radial cracking in ceramic coatings Lee, CS; Kim, Do Kyung; Sanchez, J; Miranda, P; Pajares, A; Lawn, BR, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.85, no.8, pp.2019 - 2024, 2002-08 |
| Scalable Solution Phase Synthesis of 2D Siloxene via a Two-Step Interlayer Expansion Process Ko, Seung-Bo; Sun, Yan; Park, Gun; Choi, Hee Jae; Kim, Jin Goo; Kim, June Beom; Jung, Hong Ju; et al, ACS APPLIED MATERIALS & INTERFACES, v.15, no.27, pp.32707 - 32716, 2023-06 |
| Synthesis and Characterization of Vertically Aligned Carbon Nanotube Forest for Solid State Fiber Spinning Ryu, Seong Woo; Hwang, Jae Won; Hong, Soon Hyung, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, v.12, no.7, pp.5653 - 5657, 2012-07 |
| Tensile behavior of SiCp/2124Al composites with various SiC particle sizes at room temperature Li, DQ; Ryu, Ho Jin; Hong, Soon-Hyung, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, v.10, no.6, pp.732 - 736, 2000-12 |
| The doped Pd on the crystal calculation and intermetallic property of low-temperature soldered ENEPIG substrates Zhang, Shuye; Wang, Shaoan; Zhang, Shang; Chen, Xiangyu; Zeng, Chen; Paik, Kyung-Wook; He, Peng, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, v.27, pp.7094 - 7099, 2023-11 |
Discover
Open Access
Date issued
- 2,031 2020 - 2024
- 6,675 2010 - 2019
- 5,357 2000 - 2009
- 3,582 1990 - 1999
- 982 1980 - 1989