Browse "Division of Future Vehicle(미래자동차 학제전공)" by Issue Date 

Jump to a point in the index:

Showing results 1 to 20 of 92

1
Characterization and real-time correction for non-uniformity of TEC-less bolometer FPA = 무-열전냉각소자 볼로미터 초점면배열의 비-균일성에 대한 특성 분석 및 실시간 보정link

Lee, Jung-Eon; 이중언; et al, 한국과학기술원, 2013

2
Local Binary Pattern을 이용한 화자종속 영상음성인식 = Speaker dependent visual speech recognition using local binary patternlink

주정우; Ju, Jeong-Woo; et al, 한국과학기술원, 2013

3
탄소섬유강화 복합재료의 변형률속도에 따른 인장물성의 평가 = Tensile properties of carbon/epoxy composite laminate at high strain rateslink

최재영; Choi, Jae-Young; et al, 한국과학기술원, 2013

4
High quality shape capture from an RGB-D image under uncalibrated natural illumination = 단일 RGB-D 영상을 이용한 임의의 조명에서의 고품질 3차원 모델링link

Han, Yu-Deog; 한유덕; et al, 한국과학기술원, 2013

5
Design of wireless charging system for electric vehicle = 전기 자동차 무선 충전 시스템 설계link

Kim, Hong-Seok; 김홍석; et al, 한국과학기술원, 2013

6
능동적 차선변경 지원 시스템을 위한 로봇 에이전트 기반의 자동차간 상호작용 모델 = A Surrounding vehicle’s interaction model for robotic agent-based active lane change support systemlink

조용호; Jo, Yong-Ho; et al, 한국과학기술원, 2014

7
Low-cost and low-area implementation of AES-CCM core compliant with IEEE 802.15.4 standard = IEEE 802.15.4 표준을 따른 저비용 및 저면적 AES-CCM 코어 구현link

Chang, Ji-Won; 장지원; et al, 한국과학기술원, 2014

8
Design and measurement of low EMI and high efficiency handheld resonant magnetic field charger (HH-RMFC) for wireless power transfer electrical vehicle = 낮은 전자 방해 잡음과 높은 효율의 무선 전력 전송 전기 자동차용 주입식 공진 자기장 충전기의 설계 및 측정link

Song, Chi-Eog; 송치억; et al, 한국과학기술원, 2014

9
사람-자동차 상호작용에서 로봇 에이전트를 위한 운전부하 평가모델 = Driving workload evaluation model for robotic agent over human-vehicle interactionlink

김재철; Kim Jae-Chul; et al, 한국과학기술원, 2014

10
Design of in-wheel motor powertrain systems for a micro electric car applying permanent magnet synchronous motors = 영구자석동기모터를 적용한 초소형 전기차용 인휠모터 동력구동 드라이브 시스템 설계link

Hwang, Ka-Ram; 황가람; et al, 한국과학기술원, 2014

11
삼륜차의 루프 강도 향상을 위한 구조 설계 및 평가 = Structural design and evaluation for improvement of the roof strength of a three-wheel vehiclelink

유제성; Yoo, Je-Sung; et al, 한국과학기술원, 2014

12
All-wheel-driven torque vectoring control for vehicle’s active lateral safety = 능동 차량 안전을 위한 4륜 구동 토크 벡터링 제어link

Noh, Yoon-Kab; 노윤갑; et al, 한국과학기술원, 2014

13
Large-margin and dropout learning of sum-product networks = Sum-Product Networks의 Large-Margin 기반 및 Dropout 학습법link

Jang, Ho-Yong; 장호용; et al, 한국과학기술원, 2014

14
(A) full-vehicle radio frequency interference (RFI) simulation using motor model based on hybrid modeling methods considering parasitic impedances and time-varying parameters = 하이브리드 모델링 기법에 기반 하여 기생 임피던스와 시변 변수가 고려된 모터 모델을 이용한 실차 라디오 주파수 간섭 효과 해석link

Kwack, YoungHwan; Kim, Joungho; et al, 한국과학기술원, 2015

15
LLC resonant converter with high Voltage gain using auxiliary LC resonant circuit = 추가 LC 공진 회로를 이용한 높은 전압 이득을 갖는 LLC 공진형 컨버터link

Kim, Dongkwan; 김동관; et al, 한국과학기술원, 2015

16
이산변수를 고려한 광구조체의 최적설계에 관한 연구 = A study on the design optimization of high stability telescope structure considering discrete design parameterslink

김규희; Kim, Gyuhee; et al, 한국과학기술원, 2015

17
사전 정보를 이용한 규모 적응형 깊이 정보 필터법 = Scale adaptive depth-map filtering using learned priorlink

김민현; Kim, Minhyun; et al, 한국과학기술원, 2015

18
능동 현가장치 예견 제어를 위한 초음파 배열 센서 기반 도로 노면 추정 = Estimation of longitudinal profile of road surface using ultrasonic array sensor for preview control of active suspensionlink

문해니; Mun, Haeni; et al, 한국과학기술원, 2015

19
Maximum margin learning with sub-SPNs for cell classification = 보조 합-곱 네트워크와 최대 마진 훈련을 이용한 세포 이미지 분류link

Na, Yongcheon; 나용천; et al, 한국과학기술원, 2015

20
열 영상 내 환자 자동 낙상 인식을 위한 다중 특징 결합 = Combining multiple features for automatic fall detection of patients using thermal imagerylink

김대언; Kim, Dae-Eon; et al, 한국과학기술원, 2016

rss_1.0 rss_2.0 atom_1.0