LPG 액상분사 엔진에서 아세톤 PLIF를 이용한 연료분포 측정기법 연구Acetone PLIF for Fuel Distribution Measurements in Liquid Phase LPG Injection Engine

Cited 0 time in webofscience Cited 0 time in scopus
  • Hit : 670
  • Download : 1
Planar laser-induced fluorescence(PLIF) has been widely used to obtain two dimensional fuel distribution. Acetone PLIF is chosen because fluorescence signal from acetone as a fluorescent tracer is less sensitive to oxygen quenching than other dopants. Acetone PLIF is applied to measure quantitative air excess ratio distribution in an engine fueled with LPG. Acetone is excited by KrF excimer laser (248nm) and its fluorescence image is acquired by ICCD camera with a cut-off filter to suppress Mie scattering from the laser light. For the purpose of quantifying PLIF signal, an image processing method including the correction of laser sheet beam profile is suggested. Raw images are divided by each intensity of laser energy and profile of laser sheet beam. Inhomogeneous fluorescence images scaled with the reference data, which is taken by a calibration process, are converted to air excess ratio distribution. This investigation shows instantaneous quantitative measurement of planar air excess ratio distribution for gaseous fuel.
Publisher
한국자동차공학회
Issue Date
2004-01
Language
Korean
Citation

한국자동차공학회 논문집, v.12, no.1, pp.74 - 82

ISSN
1225-6382
URI
http://hdl.handle.net/10203/15971
Appears in Collection
ME-Journal Papers(저널논문)
Files in This Item

qr_code

  • mendeley

    citeulike


rss_1.0 rss_2.0 atom_1.0