Flip-chip bonding of MEMS scanner for laser display using electroplated AuSn solder bump

Cited 10 time in webofscience Cited 0 time in scopus
  • Hit : 989
  • Download : 2078
DC FieldValueLanguage
dc.contributor.authorChu, KMko
dc.contributor.authorChoi, WKko
dc.contributor.authorKo, YCko
dc.contributor.authorLee, JHko
dc.contributor.authorPark, HyoHoonko
dc.contributor.authorJeon, DukYoungko
dc.date.accessioned2007-09-20T02:37:10Z-
dc.date.available2007-09-20T02:37:10Z-
dc.date.created2012-02-06-
dc.date.created2012-02-06-
dc.date.issued2007-02-
dc.identifier.citationIEEE TRANSACTIONS ON ADVANCED PACKAGING, v.30, no.1, pp.27 - 33-
dc.identifier.issn1521-3323-
dc.identifier.urihttp://hdl.handle.net/10203/1520-
dc.description.abstractA MEMS scanner has been flip-chip bonded by using electroplated AuSn solder, bumps. The microelectromechanical systems (MEMS) scanner is mainly composed of two structures having vertical comb fingers. To optimize the bonding condition, the MEMS scanner was flip-chip bonded with various bonding temperatures. Scanning electron microscopy (SEM) with an energy dispersive X-ray (EDX) spectroscopic system was used to observe the microstructures of the joints and analyze the element compositions of them. The die shear strength increased as the bonding temperature increased. During the thermal aging test, the delamination occurred at the interconnection of the MEMS scanner bonded at 340 degrees C. It is inferred that the Au layer serving as pad metallization has been dissolved in the molten AuSn solder totally, and subsequently the Cr layer was directly exposed to the AuSn solder. Judging by the results of both die shear test and thermal aging test, the optimal bonding temperature was found to be approximately 320 C. Finally, using this MEMS scanner, we obtained an optical scanning angle of 32 when driven by the ac control voltage of the resonant frequency in the range of 22.1-24.5 kHz with the 100-V do bias voltages.-
dc.description.sponsorshipThis work was supported by the Center for Electronic Packaging Materials (ERC) of MOST/KOSEF under Grant R11-2000-085-10001-0.en
dc.languageEnglish-
dc.language.isoen_USen
dc.publisherIEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC-
dc.subjectPROJECTION DISPLAY-
dc.subjectTHIN-FILM-
dc.subjectSN-
dc.subjectMETALLIZATION-
dc.subjectMIRROR-
dc.subjectJOINTS-
dc.titleFlip-chip bonding of MEMS scanner for laser display using electroplated AuSn solder bump-
dc.typeArticle-
dc.identifier.wosid000244191100004-
dc.identifier.scopusid2-s2.0-33947427981-
dc.type.rimsART-
dc.citation.volume30-
dc.citation.issue1-
dc.citation.beginningpage27-
dc.citation.endingpage33-
dc.citation.publicationnameIEEE TRANSACTIONS ON ADVANCED PACKAGING-
dc.identifier.doi10.1109/TADVP.2006.890209-
dc.contributor.localauthorPark, HyoHoon-
dc.contributor.localauthorJeon, DukYoung-
dc.contributor.nonIdAuthorChu, KM-
dc.contributor.nonIdAuthorChoi, WK-
dc.contributor.nonIdAuthorKo, YC-
dc.contributor.nonIdAuthorLee, JH-
dc.type.journalArticleArticle-
dc.subject.keywordAuthorAuSn solder-
dc.subject.keywordAuthorflip-chip bonding-
dc.subject.keywordAuthormicroelectromechanical systems (MEMS)-
dc.subject.keywordAuthorscanning mirror-
dc.subject.keywordAuthorthermal aging-
dc.subject.keywordPlusPROJECTION DISPLAY-
dc.subject.keywordPlusTHIN-FILM-
dc.subject.keywordPlusSN-
dc.subject.keywordPlusMETALLIZATION-
dc.subject.keywordPlusMIRROR-
dc.subject.keywordPlusJOINTS-
This item is cited by other documents in WoS
⊙ Detail Information in WoSⓡ Click to see webofscience_button
⊙ Cited 10 items in WoS Click to see citing articles in records_button

qr_code

  • mendeley

    citeulike


rss_1.0 rss_2.0 atom_1.0