Browse by Type Thesis(Master)

Showing results 20521 to 20540 of 33025

20521
공급자 관점을 고려한 구매기업의 공급자 개발 활동 = Buyer's supplier development activities from supplier's perspectivelink

배정호; Bae, Jeong-Ho; et al, 한국과학기술원, 1999

20522
공급자 선택과 주문량 할당에 대한 시뮬레이티드 어닐링 알고리즘 = A simulated annealing algorithm for supplier selection and order quantity allocationlink

허소연; Her, So-Yeon; et al, 한국과학기술원, 2005

20523
공급자 원가역량을 개선하기 위한 유인정책에 관한 연구 = A study on the incentive mechanism for improving cost performance of supplierlink

이흥로; Lee, Heung-Ro; et al, 한국과학기술원, 1998

20524
공급자-생산자 간의 물류체인 특성에 관한 연구 = A study on the characteristics of material flow chain between supplier and manufacturerlink

하영호; Ha, Yeong-Ho; et al, 한국과학기술원, 1990

20525
공기 다단 연소기에서 재연소 과정의 $NO_x$ 저감 효과 = Experimental study of reburning process for $NO_x$ reduction with a multi air-staged burnerlink

김혁수; Kim, Hyuk-Su; et al, 한국과학기술원, 2006

20526
공기 연료증기 및 액적 혼합물에서의 비정상 화염전파에 관한 연구 = Transient flame propagation through a mixture of air, fuel vapor and dropletslink

김형문; Kim, Hyeoung-Moon; et al, 한국과학기술원, 1989

20527
공기 조화를 위한 다층 퍼지 제어에 관한 연구 = A study on multi-level fuzzy control for a room air-conditionerlink

김형섭; Kim, Hyung-Sup; et al, 한국과학기술원, 1993

20528
공기 청정기의 음질 평가 모델에 관한 연구 = A study on the sound quality evaluation model for an air cleanerlink

장수원; Jang, Su-Won; et al, 한국과학기술원, 2007

20529
공기 충돌형 노즐을 장착한 액체 연료 연소기의 저주파 연소불안정 모드 분석 = Modal analysis of low-frequency combustion instabilities of an airblast injector in a liquid-fuel combustorlink

이정재; 김규태; et al, 한국과학기술원, 2019

20530
공기베어링과 Linear DC-motor로 이루어진 정밀 직선구동기 시스템에 관한 연구 = A study on the precision linear actuator system with externally pressurized air-bearing and linear DC-motorlink

이우종; Lee, Woo-Jong; et al, 한국과학기술원, 1996

20531
공기베어링의 능동제어에 대한 연구 = A study on active control of air bearinglink

이정배; Lee, Jeong-Bae; et al, 한국과학기술원, 1993

20532
공기불요 연료전지 구동을 위한 $NH_3BH_3$ 열분해 특성 평가 = Pyrolysis characteristic evaluation of $NH_3BH_3$ for a fuel cell AIP systemlink

김경환; Kim, Kyung-Hwan; et al, 한국과학기술원, 2010

20533
공기압 단속 서보 방법을 이용한 로보트 그리퍼의 물건 잡는 힘 제어에 관한 연구 = A study of gripping force control of robot gripper using pneumatic on-off control systemlink

서효원; Suh, Hyo-Won; et al, 한국과학기술원, 1983

20534
공기압 서보 시스템의 위치 제어 및 시뮬레이션에 관한 연구 = A study on the position control and simulation of pneumatic sevo systemlink

최서호; Choi, Seo-Ho; et al, 한국과학기술원, 1995

20535
공기압 서보 시스템의 위치제어 성능 향상을 위한 밸브 개폐 알고리듬에 관한 연구 = A study on the valve-operating algorithm for improving the position control of pneumatic servo systemlink

최재석; Choi, Jae-Suck; 조형석; 이정오; et al, 한국과학기술원, 1999

20536
공기압 서어보 시스템에서의 단속적 제어 기술에 관한 연구 = A study on an on-off control technique for electro-pneumatic servo-mechanismslink

서중언; Seo, Joong-Eon; 조형석; 장효환; et al, 한국과학기술원, 1984

20537
공기압 서어보 시스템의 시뮬레이션 프로그램 개발 = On the development of a simulation program for pneumatic servo systemslink

채운용; Chai, Yoon-Yong; 양동열; 조형석; et al, 한국과학기술원, 1986

20538
공기압 위치제어 장치를 위한 맥동형 단속적 제어 기술의 개발 = Development of modified on-off control for an electro-pneumatic servo-mechanismlink

은탁; Eun, Tak; et al, 한국과학기술원, 1982

20539
공기압 위치제어를 위한 부하적응 제어기에 관한 연구 = A study on a load adaptive controller for pneumatic position controllink

이순걸; Lee, Soon-Geul; 조형석; 양동열; et al, 한국과학기술원, 1985

20540
공기업 통신자원 활용 극대화 전략 : K사 사례 = A maximization strategy for utilizing telecommunication resources of utility company : K company caselink

오길환; Oh, Gil-Whan; et al, 한국과학기술원, 1999

rss_1.0 rss_2.0 atom_1.0