Browse by Type Thesis(Master)

Showing results 5521 to 5540 of 31977

5521
Cu-$Al_2O_3$ 분산합금에서 $Al_2O_3$가 합금의 재결정 온도와 기계적 및 전기적 성질에 미치는 영향 = The effect of alumina on the recrystallization behaviors and the mechanical properites of the alumina dispersed copper alloyslink

이재훈; Lee, Jae-Hoon; et al, 한국과학기술원, 1985

5522
Cu-1.35Ni-0.32Si-0.036P 합금의 석출과정의 속도론적 연구 = Precipitation kinetics in a Cu-1.35Ni-0.32Si-0.036P alloylink

성태연; Seong, Tae-Yeon; 김영길; 임호빈; et al, 한국과학기술원, 1985

5523
Cu-10%Sn 계 소결합금의 칫수팽창기구와 혼합도에 의한 칫수팽창에 대한 연구 = The dimensional change during sintering of Cu-10w/o Sn the possible mechanism and effect of mixednesslink

정영훈; Chung, Young-Hoon; et al, 한국과학기술원, 1977

5524
Cu-10wt%Sn 성형체의 소결중 액상유동에 미치는 성형밀도의 영향 = Effect of green density on flow behavior of Sn melt during sintering of Cu-Sn compactslink

김정우; Kim, Jeoung-Woo; et al, 한국과학기술원, 1984

5525
Cu-10wt%Sn 합금의 소결에서 가열 중 미세조직의 변화 = Microstructural changes during heating in sintering of Cu-10wt%Sn alloyslink

엄창범; Eom, Chang-Beom; et al, 한국과학기술원, 1983

5526
Cu-25Ni 합금의 cyclic creep시 strain burst 현상에 관한 연구 = Investigation of the strain burst phenomenon of Cu-25Ni alloy due to cyclic creep deformationlink

류재화; Ryu, Jae-Hwa; et al, 한국과학기술원, 1985

5527
Cu-30%Sn 합금 분말로부터 제조된 청동함유 베어링의 성질에 관한 연구 = Properties of bronze oilless bearings made from Cu-30% Sn prealloyed powderlink

은광용; Eun, Kwang-Yong; et al, 한국과학기술원, 1977

5528
Cu-4∼7%Ni-3%Al 합금에서 냉간압연율이 기계적 특성 및 석출에 미치는 영향 = Effects of cold reduction ratios on mechanical properties and precipitation phenomena in Cu-4∼7%Ni-3%Al alloyslink

조영래; Cho, Young-Rae; et al, 한국과학기술원, 1986

5529
Cu-Ag core-shell nanowire transparent conducting film with enhanced oxidation stability = 투명전극용 Cu-Ag 코어-쉘 금속 나노와이어의 합성 및 산화 저항성 향상에 관한 연구link

Jung, Sulgi; Lee, Hyuck Mo; et al, 한국과학기술원, 2018

5530
Cu-Ag-Co계에서 불연속석출에 미치는 외부응력의 영향 = The effect of external stress on discontinuous precipitation in Cu-Ag-Co alloylink

염승진; Yeom, Seung-Jin; et al, 한국과학기술원, 1990

5531
Cu-epoxy 계의 접착력에 관한 연구 = A study on the adhesion of Cu-epoxy systemlink

최광성; Choi, Kwang-Seong; et al, 한국과학기술원, 1995

5532
Cu-In-Ga 전구체 위에 $Ga_2Se_3$ 층을 적용하여 제조된 $Cu(In,Ga)Se_2$ 박막의 Ga 분포 변화 연구 = Ga distribution in $Cu(In,Ga)Se_2$ thin film prepared by selenization of co-sputtered Cu-In-Ga precursor with $Ga_2Se_3$ layerlink

정광선; Jung, Gwang-Sun; et al, 한국과학기술원, 2010

5533
Cu-Ni 합금계에서 열역학적 인자가 static 및 cyclic creep 거동에 미치는 영향 = The effect of thermodynamic factor on static and cyclic creep behavior in Cu-Ni alloylink

주세돈; Choo, Se-Don; 남수우; 유진; et al, 한국과학기술원, 1986

5534
Cu-Ni 합금계에서 용질원자가 정적 및 반복응력 크립거동에 미치는 영향 = The effect of solute atom on the static and cyclic creep behavior of Cu-Ni alloylink

이상인; Rhee, Sang-In; et al, 한국과학기술원, 1989

5535
Cu-Ni-Al 강의 합금원소양에 따른 시효경화효과의 변화 = Change in age hardening effects with the quantities of alloying elements of Cu-Ni-Al steellink

정원국; Jeoung, Weon-Guk; et al, 한국과학기술원, 1980

5536
Cu-O Eutectic melt 에 의한 alumina 소결체와 전해동의 접합 = Alumina ceramic-to-copper bonding by Cu-Oeutectic meltlink

김도경; Kim, Do-Kyeong; et al, 한국과학기술원, 1984

5537
Cu-Zn 계의 열역학적 성질 및 order parameter 의 조성 및 온도 의존성에 관한 연구 = Composition and temperature dependence of thermodynamic properties and order parameter in Cu-Zn systemlink

이종석; Lee, Jong-Seog; 김영길; 임호빈; et al, 한국과학기술원, 1985

5538
Cu-Zn 합금에서 적층 결함에너지가 cyclic creep 에 미치는 영향 = The effect of stacking fault energy on cyclic creep in Cu-Zn alloyslink

최재영; Choi, Jae-Young; et al, 한국과학기술원, 1985

5539
Cu-Zn-Al 계 형상기억 합금의 상변태 및 기계적성질에 관한 연구 = Phase transition and mechanical property of Cu-Zn-Al shape memory alloylink

한연수; Han, Yon-Su; et al, 한국과학기술원, 1984

5540
Cu-Zn-Al 및 Cu-Zn-Al-Mn 형상기억합금에서 열처리가 martensite 변태온도에 미치는 영향 = The effect of heat treatment on martensitic transformation temperature in Cu-Zn-Al and Cu-Zn-Al-Mn shape memory alloyslink

이언식; Lee, Eon-Sik; et al, 한국과학기술원, 1987

rss_1.0 rss_2.0 atom_1.0