47741 | Investigating ways to reform international education in confucian Contexts: A Case study of south korean higher education Schenck, A.; Mottalib, R.E.A.; Baldwin, Matthew, International Education Studies, v.6, no.7, pp.31 - 47, 2013 |
47742 | Investigation and Analysis of Acoustojets by Spectral Element Method Mahariq, Ibrahim; Giden, Ibrahim H.; Alboon, Shadi; Aly, Wael Hosny Fouad; Youssef, Ahmed; Kurt, Hamza, MATHEMATICS, v.10, no.17, 2022-09 |
47743 | Investigation and Improvement of 90 degrees Direct Bends of Metal-Insulator-Silicon-Insulator-Metal Waveguides Shin, Jin-Soo; Kwon, Min-Suk; Lee, Chang-Hee; Shin, Sang Yung, IEEE PHOTONICS JOURNAL, v.5, no.5, 2013-10 |
47744 | Investigation for the bending modes of a semi-circular pyramidal kagome sandwich structure and the bending load calculation Hwang, June-Sun; Choi, Tae-Gyun; Lyu, Min-Young; Yang, Dong-Yol, COMPOSITE STRUCTURES, v.134, pp.10 - 17, 2015-12 |
47745 | Investigation for the effects of ball milling process on the physical characteristics, the behaviors of carriers and the photocatalytic activity of sulfur doped g-C3N4 Kim, Jin Su; Oh, Jae Woong; Woo, Seong Ihl, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.42, no.8, pp.5485 - 5495, 2017-02 |
47746 | Investigation into a new incremental forming process using an adjustable punch set for the manufacture of a doubly curved sheet metal Yoon, SJ; Yang, Dong-Yol, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, v.215, no.7, pp.991 - 1004, 2001 |
47747 | Investigation into development of progressive-type variable lamination manufacturing using expandable polystyrene foam and its apparatus Ahn, DG; Lee, SH; Yang, Dong-Yol, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, v.216, no.9, pp.1239 - 1252, 2002 |
47748 | Investigation into forming sequences for the incremental forming of doubly curved plates using the line array roll set (LARS) process Shim, DS; Yang, Dong-Yol; Kim, KH; Chung, SW; Han, MS, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, v.50, no.2, pp.214 - 218, 2010-02 |
47749 | Investigation into hydromechanical reverse redrawing assisted by separate radial pressure - process development and theoretical verification Kim, JB; Lee, DW; Yang, Dong-Yol; Park, CS, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, v.211, no.6, pp.451 - 462, 1997 |
47750 | Investigation into Manufacturing of Very Long Cups by Hydromechanical Deep Drawing and Ironing with Controlled Radial Pressure Yang, Dong-Yol; Kim, JB; Lee, DW, CIRP ANNALS - MANUFACTURING TECHNOLOGY, v.44, no.1, pp.255 - 258, 1995 |
47751 | Investigation Into Mechanical Behavior of the Current Collector for the Molten Carbonate Fuel Cell Through Finite Element Analysis Using Hexahedral Mesh Coarsening Lee, Chang Whan; Yang, Dong-Yol; Park, Jong-seung; Kim, Yun-sung; Lee, Tae-Won, JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, v.11, no.6, 2014-12 |
47752 | Investigation into Non-Steady-State Three-Dimensional Extrusion of a Trocoidal Helical Gear by the Rigid-Plastic Finite Element Method Yang, Dong-Yol; Lange, K, CIRP ANNALS - MANUFACTURING TECHNOLOGY, v.43, no.1, pp.229 - 233, 1994 |
47753 | Investigation into the effect of transverse condudction on the thermal performance of a flat-plate pulsating heat pipe Noh, Hyung Yun; Yoon, Aejung; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.181, 2021-12 |
47754 | Investigation into the effects of passive check valves on the thermal performance of pulsating heat pipes Jung, Chuljae; Kim, Sung Jin, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.204, 2023-05 |
47755 | Investigation into the improvement of welding strength in three-dimensional extrusion of tubes using porthole dies Kim, KJ; Lee, CH; Yang, Dong-Yol, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.130, pp.426 - 431, 2002 |
47756 | Investigation into the thermo-viscoplastic finite element analysis of square die extrusion of square section with Lagrangian description Kang, YS; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE, v.36, no.8, pp.907 - 924, 1996-08 |
47757 | Investigation into the wrinkling behaviour of thin sheets in the cylindrical cup deep drawing process using bifurcation theory Kim, JB; Yoon, Jeong Whan; Yang, Dong-Yol, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, v.56, no.12, pp.1673 - 1705, 2003-03 |
47758 | Investigation into thermal characteristics of linear hotwire cutting system for variable lamination manufacturing (VLM) process by using expandable polystyrene foam Ahn, DG; Lee, SH; Yang, Dong-Yol, INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE, v.42, no.4, pp.427 - 439, 2002-03 |
47759 | Investigation into Three-Dimensional Net Shaping Using a New Rapid Prototyping Process and Its Applied Technology Yang, Dong-Yol; AHN, DG; LEE, SH; KIM, KD, JOURNAL OF THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY, v.44, no.507, pp.45 - 46, 2004-04 |
47760 | INVESTIGATION INTO TOOL SURFACE DESCRIPTION FOR FINITE-ELEMENT ANALYSIS OF 3-DIMENSIONAL SHEET-METAL FORMING PROCESSES Yang, Dong-Yol; YOO, DJ; SONG, LS; LEE, JH, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.45, no.1-4, pp.267 - 273, 1994-09 |